Kyoritsu
  • Email: sales@mjt-id.com

Kyoritsu

  • Frontpage
    Article Count:
    3
  • ABB Indonesia
    Article Count:
    2
    • Circuit Breaker

      Circuit breakers

      ABB SACE means quality and innovation in the low voltage world.


      Products that have been designed to increase efficiency in all installations: from industrial and naval applications to traditional and renewable power generation installations, buildings, data centers and shopping centers. 

      High quality, accuracy and reliability are key features for ABB low voltage circuit-breakers. High performances in any conditions, safe-to-use products and easy replacements of components are always guaranteed.

      Article Count:
      7
    • Stop Kontak
      Article Count:
      4
    • Kontaktor
      Article Count:
      7
    • Capasitors and Filters

      Low-voltage capacitors and filters

      Improving the performance, quality and efficiency of electrical systems

      Power Quality of the low voltage network is an important challenge for today's industrial and commercial applications. Good Power Quality leads to trouble free and efficient operation of installations.

      Why ABB?

      ABB has a comprehensive portfolio for addressing a wide variety of power quality problems.  The benefits of using ABB's LV capacitor and filter solutions include:  

      • Compliance with the strictest power quality regulations on reactive power and harmonics 
      • Reducing and/or eliminating utility penalties for a low power factor and/or harmonics
      • Off-loading of and reduction of power losses in cables and transformers
      • Reducing production downtime and/or commercial system downtime
      • Increasing system efficiency and reduction of CO2 emissions
      Article Count:
      0
    • Manual Motor Starter
      Article Count:
      7
    • Softstarter
      Article Count:
      4
    • Socket outlets

      Living without current today is impossible. However, it can also quickly become life-threatening. A device can quickly become defective without being aware of it, or the offspring plays with the socket outlet. Hazards can also occur when one drills into a power cable, unintentionally damages a cable or lightning strikes. All this is prevented when one has installed the safe and convenient socket outlets from ABB/Busch-Jaeger.

      Article Count:
      1
  • Amatrol Indonesia
    Article Count:
    2
    • Electronics
      Article Count:
      8
    • Electrical

      Electrical

      Article Count:
      11
    • Mechanical
      Article Count:
      61
    • Fluid Power

      Fluid Power - Amatrol - Learning Systems for Technical Education

      Pneumatics and hydraulics have powered machines in innumerable applications across manufacturing, industry, agriculture, power generation, and many more for decades. These power sources are utilized all over the world in countless fields, so a strong theoretical understanding combined with hands-on training in pneumatic and hydraulic applications is indispensable for nearly any industry. Amatrol’s line of pneumatic and hydraulic training solutions is second-to-none in depth of knowledge and skills and the breadth of different applications offered. These systems align with several Amatrol programs, such as: construction technologyindustrial maintenanceiron and steeloil and gas, and many more!

      Hydraulics

      Amatrol’s Hydraulics training systems includes basic, intermediate, and advanced levels so that learners can fully understand the conceptual building blocks of hydraulic power before moving on to more advanced applications and skills. Amatrol also offers training systems for electro-hydraulic, hydraulic maintenance, and hydraulic troubleshooting, as well as hydraulic training for the high school level.

      To learn more about Amatrol’s Hydraulic training systems, please click here.

      Pneumatics

      Amatrol’s Pneumatics training systems first cover the basic conceptual knowledge of pneumatic power that learners will need to understand more intermediate and advanced skills and applications. In addition to basic, intermediate, and advanced pneumatic learning systems, Amatrol also offers electro-pneumatic and pneumatic troubleshooting, as well as pneumatic systems for high schools and three portable training options.

      Is Your Training Space Limited? Amatrol Offers Combined Pneumatics / Hydraulics Training Options

      If your training needs require both pneumatic and hydraulic preparation, Amatrol has a variety of all-in-one resources that cover basic-through-advanced knowledge and skills in both areas. The Basic Fluid Power Learning System – Single Surface Bench (850-C1) allows learners to work with up to six panels simultaneously with storage under the system for additional panels. If your logistical constraints include limited training space, Amatrol has developed double-sided versions of the 850-C1 to maximize your training options when space is tight. The Basic Fluid Power Learning System – Double Sided A-Frame Bench with One Hydraulic Manifold (850-CD2) or Two Hydraulic Manifolds (850-CD1) allows learners to work on up to twelve panels simultaneously with storage underneath the bench for additional panels.

      Even More Fluid Power Training Options

      Piping Learning System (950-PS1): covers how to select, size, identify, and install a variety of piping types, fittings, and valves, including: iron pipe, steel tubing, hydraulic hose, plastic pipe, copper tubing, globe valves, gate valves, check valves, and Sloan valves.

      Electronic Sensors Learning System (85-SN1): teaches the operation of electronic, non-contact sensors and their applications in industry. Electronic sensors are used in many types of applications for feedback to electric relay controls and programmable controllers. This system covers industry-relevant skills, including how to operate, install, analyze, and design sensor systems. This system can be used in conjunction with the Electro-Fluid Power Learning System (85-EF)Electro-Hydraulics Learning System (85-EH), and Electro-Pneumatics Learning System (85-EP).

       

      Article Count:
      11
    • Green Technology

      Amatrol’s Green Technology training systems provide industry-relevant knowledge and skills in the rapidly expanding areas of Solar and Wind energy.

      Knowledge Building

      A great place to start in understanding the importance of Solar and Wind technology, Amatrol offers interactive multimedia courses in Wind and Solar Concepts that provide learners with an understanding of how we can harness these vast energy sources.  Some of the topics that learner will explore include how to read a map showing wind patterns and how to properly position a solar panel for optimum radiation collection throughout the entire year.

      Hands-On, Job-Ready Skills

      Amatrol’s Solar and Wind hardware simulators, supported by interactive multimedia, provide the opportunity to gain industry-vetted skills in the classroom.

      Solar and Wind Technicians require specialized training to ensure that installed systems operation to their optimal levels.  While these systems are similar to others that include electrical and fluid components, their installation, set up, maintenance, and troubleshooting procedures are unique and proper training is essential.

      Gaining the knowledge and skills provided in these learning systems are a portion of Amatrol’s overall Green Energy Technology program that places the learner on the path to acquiring certifications related to green technologies.

      Article Count:
      8
    • Lean Manufacturing

      Enhance Your Training with Amatrol’s Lean Manufacturing Program!

      Lean Manufacturing is an essential component in modern manufacturing and Amatrol has created a program that present these concepts in a clear, concise methodology.  Lean manufacturing is the business philosophy of improving efficiency and product quality by eliminating waste and improving production flow.  It focusses on the expenditure of resources and preserving value with less work.

      Amatrol’s Lean courses explore the history, evolution, and benefits of Lean; workplace organization; proper machine set-up; standardized work; and topic areas such as Poka-Yoke, Kaizen, and 5S (Sort, Straighten, Shine, Standardize, Sustain).

      Amatrol’s Interactive Multimedia Make Lean Concepts Easy to Grasp

      Amatrol’s Lean courses engage the learner with various types of interactivity, videos, and animations to keep their focus on the task in ways that a “page-turner” type course cannot.  As one example, while learning about 5s, the learner is presented with a view of an industrial manufacturing area and asked to click on conditions that violate the 5s rules.  Other examples  include interacting with a production cycle to see how and why different types of Kanban system are used and determining takt times for a process.

      Article Count:
      13
    • Machining

      Machining is a vital industrial field that involves using lathes, milling machines, and drill presses to cut a piece of material into a specific shape or size to produce various items. Amatrol’s Machining program brings a highly focused, streamlined set of skills to this program area.  Within this program, Amatrol focusses heavily on CNC machine operation. Learners will study important skills such as operating the CNC machine to set-up of tooling and fixtures to quality inspection. This program aligns with several Amatrol programs including CNC Machine OperatorIndustrial Maintenance, and Advanced Manufacturing.

      CNC Machines

      CNC Machine Tools Learning System – Denford Micromill: teaches basic safety and operation of the CNC mill as well as programming fundamentals such as: linear interpolation, startup and shutdown blocks, tooling selection, locating zero, absolute and incremental positioning and circular interpolation. This system also covers essential CNC skills like calculating the speeds and feeds for CNC operations, how canned cycles and subprograms are used to simplify CNC programs, and how to use cutter compensation. This learning system can be purchased with the Micromill included (95-CNC1D) or the customer can supply their own Micromill (95-CNC1DC).

      CNC Machine Operator Programs

      CNC Machine Operator Program – Fanuc Based Interface (950-CNCOP1): is the exclusively recommended CNC Machine Operator program by NIMS (National Institute for Metalworking Skills). This program brings a highly focused, streamlined set of skills to CNC Machine Operator training.

      CNC Machine Operator Program – Haas Based Interface (95-CNCOP2): covers CNC machine operation with a HAAS interface. Major topic areas include basic measurement, print reading, orientation tolerances, form tolerances, drill operation, and much more!

      CNC Machine Operator Program Instructor Training (95-TRAIN): as a recommended precursor to Amatrol’s CNC Machine Operator programs, this course provides on-site training for instructors and includes course tuition at Amatrol.

      Machine Tools

      Machine Tools 1 Learning System (95-MP-1): covers band saw operation, drill press introduction and operations, manufacturing hand tools introduction, manual milling machine introduction, milling processes, manual lathe introduction, turning operations, and lathe operations.

      High School Options for Machining Training

      In addition to learning systems geared toward post-secondary and industrial customers, Amatrol also offers systems specifically designed for high schools. One of the biggest challenges facing the workforce today is a skilled worker shortage. Because of this, Amatrol is dedicated to providing high schools with learning solutions that will cover applicable STEM knowledge and advanced manufacturing topics and skills. High School learning systems within the machining area include:

      CNC Machines 1 Learning System – Denford Micromill (96-CNC1)

      CNC Machines 2 Learning System – Denford Micromill (96-CNC2)

      CNC Machines 3 Learning System – Denford Microturn (96-CNC3)

      Machine Tools 1 Learning System (96-MP1)

      Machine Tools 2 Learning System (96-MP2)

      Machine Tools 3 Learning System (96-MP3)

      Article Count:
      11
    • Manufacturing Processes

      Amatrol’s Manufacturing Processes products cover a wide range of vital industrial topics from the very basics like fasteners and gaskets to advanced areas like product finishing and welding. All of these products feature real-world components for the best hands-on skill-building training available and world-class curricula packed full of knowledge necessary to understand the theory of why things are done instead of just explaining how to do them.

      Manufacturing Processes products align with a variety of Amatrol programs like advanced manufacturingconstruction technology, and CNC machine operator. This area also aligns with ourCertified Production Technician program. This program features a competency-based instructional design that teaches the Manufacturing Skill Standards Council’s (MSSC) nationally recognized standards.

      Fasteners, Gaskets, Wiring Harness, and Production Assembly

      Fasteners Learning System (950-FNS1): covers a wide variety of fasteners commonly found in manufactured products and processes, including applicable knowledge of bolt types, sizes and grades, as well as screws, washers, locking nut devices, pins, and keys.

      Gaskets Learning System (950-GSS1): teaches about selecting, installing, and storing the many types of gaskets available that are vital in manufactured products and processes where air or liquid are involved.

      Wiring Harness Learning System (950-WHS1): introduces topics like wire routing, common types of connectors and clips, harness installation, and troubleshooting.

      Production Assembly Learning System (950-PAS1): covers industry-relevant skills including: how to identify and safely handle torque wrenches; operate both click-type and air impulse torque wrenches; properly sequence fittings; install, operate and maintain O-rings and lip seals; and more! This system offers expansions like split flange couplingelectric torque wrenchstall bar, and instrumented DC-electric torque wrench.

      Print Reading

      Print Reading 1 Learning System (950-PR1): covers industry-related skills including use of different reference coordinates, creating and editing drawings, using technical drawing views and dimensions, multi-view drawings, and developing schematic diagrams.

      Contamination

      Contamination Learning System (950-CNS1): covers how to prevent contamination, as well as inspect / monitor for any unexpected problems through topics like the ISO cleanliness code, the importance of maintaining a clean facility and workstation, protective measures such as use of lubricants, how to detect contamination, and how to take corrective action should contamination occur.

      CAD and CAM

      Computer Aided Design 1 Learning System (96-CAD1B): introduces solid modeling by describing the function of solid modeling software and the features of solid modeling through topics like drawing planes, extrude cut features, fillets and chamfers, and revolved features. This learning system also offers an advanced expansion system, Computer Aided Design 2 (96-CAD2B).

      Computer-Aided Manufacturing 1 Learning System (96-CAM1): covers the fundamentals of part design and development using Mastercam software. Mastercam allows learners to design and draw complex shapes and parts on a computer.

      Welding

      Welding Technology Learning System (950-WT1): teaches how to safely create an array of high quality weld types.

      Surveying

      Surveying 1 Learning System (96-SV1): introduces the fundamentals of surveying, focusing on determining the terrestrial or three-dimensional position of points and the distances and angles between them. After completing this training system, learners will be able to operate surveying and mapping tools, including global positioning systems (GPS) associated with surveying.

      Product Finishing

      Product Finishing Learning Systems (950-PFS1-4): covers vital industry skills in surface preparation and painting. Major topics covered by the 950-PFS systems include product finish inspection, sanding and scuffing, washing and pretreatment, masking and demasking, spray painting processes, electrostatic liquid spray painting, and electrostatic powder painting. These systems have very specific facility requirements and do not include installation. If interested, please contact an Amatrol representative for a full list of requirements.

      High School Options for Manufacturing Processes Training

      In addition to learning systems geared toward post-secondary and industrial customers, Amatrol also offers systems specifically designed for high schools. One of the biggest challenges facing the workforce today is a skilled worker shortage. Because of this, Amatrol is dedicated to providing high schools with learning solutions that will cover applicable STEM knowledge and advanced manufacturing topics and skills. High School learning systems within the manufacturing processes area include:

      • Print Reading 1 Learning System (96-PR1)
      • Computer Aided Design 1 Learning System (96-CAD1B)
      • Computer Aided Design 2 Learning System (96-CAD2B)
      • Computer-Aided Manufacturing 1 Learning System (96-CAM1)
      • Surveying 1 Learning System (96-SV1
      Article Count:
      6
    • Process Control

      Process control is a versatile and vital part of major industries like:power generation; petrochemicals; food processing and bottling; chemical manufacturing; bio-technology; pharmaceuticals; and refineries.

      Because of the wide application of this key component, Amatrol has developed the largest and most in-depth offering of process control training options available. Amatrol offers four major process control systems, each covering a different process control application: level and flow, temperature, analytical, and pressure. Amatrol also offers a variety of training options for related process control applications such as HART, Foundation Fieldbus, and SCADA. This in-depth offering of process control training solutions fit within various Amatrol programs like:

      • Biotech
      • Iron and Steel
      • Mining
      • Oil and Gas
      • Power and Energy
      • And more!

      Level / Flow Process Control and Level / Flow Process Control Troubleshooting

      Level / Flow Process Control Learning System (T5552): teaches two of the most common types of process control systems, flow and liquid level, and the basic concepts on which other systems are based. This process control system allows learners to calibrate, adjust, install, operate, and connect process control systems in industrial applications. This system requires the PID Controller Module (T5552-C1-A).

      Level / Flow Process Control Troubleshooting Learning System (T5552F): this system covers all of the topics and skills included with the T5552 in addition to the industry’s best hands-on process control troubleshooting, covering 36 electrical faults, 6 mechanical faults, PID controller programming errors, flow transmitter programming errors, and I/P converter calibration errors. This system also requires thePID Controller Module (T5552-C1-A).

      Level / Flow System Expansions

      Smart Flow Transmitter Learning System (T5552-F1): provides a 4-20 mA feedback signal that is proportional to the flow rate measured by transducers that sense differential pressure. This system offers expansions like: pitot tube flow transducerVenturi flow transducer, and orifice plate flow transducer.

      Ultrasonic Liquid Level Learning System (T5552-L1): provides a 4-20 mA feedback signal that is proportional to liquid level. This course covers major topics like ultrasonic level measurements, ultrasonic level calibration, and level controls.

      Foundation Fieldbus Process Control 1 Learning System (T5552-FF1): covers a popular industrial method for calibrating and troubleshooting valves and transmitters connected to a network. Foundation Fieldbus is an all-digital, multi-drop communication system used for basic and advanced flow control, temperature control, and tank level control.

      HART Process Control 1 Learning System (T5552-H1): teaches one of the most commonly used communication protocols, HART (Highway Addressable Remote Transducer). This course allows for the practice of valuable hands-on skills such as configuring and installing a HART interface, using a HART field device to verify the integrity of a process control loop, and calibrating a differential pressure flow transmitter using HART software.

      Visualization Process Control 1 Learning System (T5552-S1): covers SCADA (Supervisory Control and Data Acquisition) that allows operators, technicians, and engineers to monitor and control process applications using sensors networked to equipment on the plant floor. These remote sensor readings are collected and displayed graphically in an organized way allowing process control decisions to be made.

      Temperature Process Control

      Temperature Process Control Learning System (T5553): allows learners to study and practice calibrating, adjusting, installing, operating, and tuning thermal process control systems in industrial applications. Major topic areas include: basic temperature control elements; loop controllers; final control elements; temperature sensors; temperature transmitters; basic temperature control; methods of automatic control; and control loop performance. This system requires either the PID Controller Module – Single Loop (T5553-C1-A) or the PID Controller Module – Dual Loop (T5553-C2-A).

      The Temperature Process Control Learning System also features two options for expansion: the Three-Channel Data Acquisition Learning System (T5553-R1A) and the Two-Channel Temperature Transmitter Module (T5553-T1).

      Analytical Process Control

      Analytical Process Control Learning System (T5554): covers major topics and skills involved with controlling and modifying the chemical properties of a substance. The Analytical Process Control Learning System covers topics like pH electrodes, pH meters and transmitters, and loop controllers and vital theoretical process control knowledge including: describing the function of a process hazard analysis; defining pH and explaining its importance; learning five common types of loop controller parameter groups; and configuring a Honeywell UDC 3500 for continuous pH control. This learning system requires either the PID Controller Module – Single Loop (T5554-C1-A) or the PID Controller Module – Dual Loop (T5554-C2-A).

      This system features a variety of expansions and add-ons including Advanced PH Control Module (T5554A1)Advanced Analytical Control Module (T5554-A2)Classic Glass Probe Module (T5554-A3), and the Three-Channel Data Acquisition Learning System (T5554-R1A).

      Pressure Process Control

      Pressure Process Control Learning System (T5555): offers the ability to control liquid level and tank pressure simultaneously using a human machine interface (HMI), programmable automation controller (PAC), and variable frequency drive (VFD). This functionality allows learners to study important industrial gas blanket applications as well as gain valuable hands-on experience in practicing a broad range of pressure process operations in both manual and automatic modes. The Pressure Process Control Learning System explores major topics like loop control devices, HMI panel operation, pressure control systems, process system alarms, automatic control methods, performance concepts, control loop performance, and open- and closed-loop tuning.

      Run a Process Control Line with a PLC Learning System

      Amatrol offers a variety of ways to expand your process control training options, including the ability to control an entire process control line or individual process control system with a programmable logic controller (PLC).

      Amatrol’s Process Control Connection Kit (33278) includes unions, piping, and cables necessary to connect two or more process control systems that will be controlled by an Allen-Bradley or Siemens PLC on the Programmable Controller Troubleshooting Learning System (890-PECB). If you would like to connect all four of Amatrol’s process control systems, three of these kits are required.

      For individual system control by the Programmable Controller Troubleshooting system using an Allen-Bradley ControlLogix PLC (890-AB5500), Amatrol offers the ControlLogix Process Control Learning System (89-PC-AB5500).

      Additionally, Amatrol offers the ability to control the T5552 system with each of our portable PLC learning options. If you’re using the Portable PLC Learning System – Allen-Bradley ControlLogix 5300 (990-PAB53A), Amatrol offers the PLC Process Control Learning System – AB CompactLogix L32 (99-PCAB53A). If you’re using the Portable PLC Learning System – Siemens S7-1200 (990-PS712), Amatrol offers the PLC Process Control Learning System – Siemens S7-1200 (99-PCS712).

      Article Count:
      4
    • Safety

      Enhance Your Training with Amatrol’s Safety Program!

      Amatrol’s Safety courses explain the basic principles necessary to keep work environments as accident free as possible. Learners will study the common causes of workplace accidents and the role of OSHA and other agencies regulating safety before moving to personal safety actions and awareness, such as Personal Protective Equipment, Hazardous Communication, Lockout / Tagout, and Accident Response.

      Amatrol’s Interactive Multimedia Prepares Learners to be Safe

      Amatrol’s Lean courses engage the learner with various types of interactivity, videos, and animations to keep their focus on the task in ways that a “page-turner” type course cannot.  As one example, while learning about lockout/tagout, learners will study concepts such as device identification, applications, and why this process is necessary for safety.

      Article Count:
      7
    • Thermal

      Amatrol’s Thermal products mainly focus on industrial, commercial and residential heating and cooling through traditional means like air conditioning, as well as topics like insulation, lighting, and ceiling fans, or through renewable energy systems like geothermal. This area also features a steam training system that covers key concepts and skills used in paper mills, power companies, and even nuclear submarines. Amatrol’s offering of thermal products align with several key programs, including:

      • HVAC
      • Power and Energy
      • STEM
      • Industrial Maintenance

      Thermal Science

      Thermal Science Learning System (T7081): introduces vital knowledge necessary to comprehend the principles of modern thermal systems, such as HVAC, geothermal, refrigeration, and steam. The Thermal Science system allows learners to perform experiments demonstrating principles such as the ideal gas law, linear and volumetric thermal expansion, basic temperature measurement, latent and sensible heat, specific heat capacity, conduction, convention, radiation, evaporative cooling, and basic refrigeration.

      Air Conditioning / Heat Pump

      Air Conditioning / Heat Pump Learning System (T7082): teaches three types of thermal systems: air conditioning, refrigeration, and heat pumps. This system is a valuable training resource for people considering a career in the HVAC industry and covers topics like compressors, reversing valves, evaporators / condensers, thermodynamic cycles, and thermal efficiency.

      Air Conditioning / Heat Pump Troubleshooting Learning System (T7082A): covers all of the topics and skills offered by the T7082, but adds imperative troubleshooting skills for identifying faults such as blockages, leakage, and refrigerant overcharging and undercharging. This air conditioning / heat pump troubleshooting system utilizes Amatrol’s FaultPro, the industry’s premier troubleshooting software, which allows faults to be electronically inserted for easy testing and tracking.

      Environmental Applications Learning System (T7083): this optional expansion to the T7082 or T7082A teaches heating and cooling applications and covers skills including how to size, select, and analyze thermal systems to optimize performance. The system models the characteristics of a living structure with outside environmental effects, such as sun or humidity, and internal design characteristics such as insulation, lighting, and ceiling fans.

      Geothermal Energy

      Amatrol has developed several systems to provide training for the ever-growing area of geothermal energy. The Geothermal Learning System (950-GEO1) begins with an introduction to geothermal heat pump systems and move rapidly into the concepts and components that make a geothermal system operate; these include closed-loop circuits, compressors, condensers, evaporators, metering devices, refrigerants, suction line accumulators, receivers, dryers, moisture indicators, thermostats, controllers, blowers, heat-pump system start-up and operation, and overall system performance.

      The following three geothermal energy learning systems feature all of the 950-GEO1’s topics and skills, as well as:

      Geothermal Learning System with Desuperheater (950-GEO1D): A desuperheater uses the excess energy from the geothermal system to heat water for little or no additional cost. Additional topics include the operation, startup, shutdown, troubleshooting, and maintenance of a desuperheater system.

      Geothermal Troubleshooting Learning System (950-GEO2): Using our world-class troubleshooting program, FaultPro, Amatrol has inserted over 25 electronic faults on the 950-GEO2! Covering electrical, mechanical, and fluid-based faults, Amatrol designed the 950-GEO2’s troubleshooting to allow learners to practice applicable industry skills and prepare them for real-world geothermal system problems. Amatrol’s troubleshooting systems are unmatched in their ability to simulate real-world equipment failures!

      Geothermal Troubleshooting Learning System with Desuperheater (950-GEO2D): features all topics and skills for the base system, desuperheater, and troubleshooting.

      Geothermal Flush Cart Learning System (95-GEO3): can be added to any of the geothermal learning systems and teaches how to purge debris and air from the geothermal loop and then charge it with a glycol/water solution.

      Steam Systems

      Steam Systems 1 Learning System (950-SH1): covers the operation, installation, maintenance, and repair of steam systems, as well as important concepts like internal energy, specific heat capacity, and flash steam, as well as important calculation for steam power, such as calculating the change in enthalpy caused by phase change. Examples of skills include the startup, shutdown, and blowdown of a boiler; the operation of an OS&Y valve; and how to test a steam trap.

      High School Options for Thermal Training

      In addition to learning systems geared toward post-secondary and industrial customers, Amatrol also offers systems specifically designed for high schools. One of the biggest challenges facing the workforce today is a skilled worker shortage. Because of this, Amatrol is dedicated to providing high schools with learning solutions that will cover applicable STEM knowledge and advanced manufacturing topics and skills. High School learning systems within the thermal area include:

      • Thermal Technology 1 Learning System (96-TT1)
      • Thermal Technology 2 Learning System (96-TT2)
      Article Count:
      6
    • Workplace Effectiveness

      Workplace Effectiveness Training from Amatrol Takes Your Program to the Next Level!

      Communication skills are essential in today’s workplaces. Improving one’s listening skills is an important part of effective communication, but there are many more techniques that should be learned to truly increase communication in an organization.  Amatrol’s Workplace Effectiveness program covers topics such as listening skills, feedback, barriers to effective communication, roles of the sender and receiver, and the importance of a medium to resolve conflicts.

      Understanding group dynamics are a critical skill in the workplace and this program breaks down the various components and attributes at work in a group.  Once these dynamics are covered, the learner is taught the steps of the decision-making process in a group situation including its advantages and disadvantages.

      Another aspect of Amatrol’s Workplace Effectiveness program is the addition of modules designed to teach the learner more about the technologies used in advanced manufacturing processes to enable them to interface effectively with other members of a group.  For example, learners will be introducted to computer numeric control that is used as the primary interface between a machine operator and the machine.  Additionally, learners will learn basic math and trigonometry as they relate to advanced manufacturing processes.  From communication skills to math, this program has it all!

      Amatrol’s Interactive Multimedia Gives Learners the Tool They Need to Excel

      Amatrol’s Workplace Effectiveness courses engage the learner with various types of interactivity and animations to keep their focus on the task.  Almost every page requires the learner interaction to proceed through the course.  This keeps the learner involved and moving forward.  In the communication modules, the learner is presented with many scenarios that make it much easier to understand the principles being presented.

      Article Count:
      8
    • Automation

      Automation - Amatrol - Learning Systems for Technical Education

      Amatrol’s extensive line of automation learning systems focuses on two main areas: robots and programmable logic controllers (PLC), specifically their function and application within automated production lines. The learning systems within this area take a building block approach to skill development, beginning with rudimentary topics like basic robot operation and basic component adjustment before moving to more advanced topics like serial device applications and multiple station control. These learning systems are vital parts of Amatrol programs like packagingindustrial maintenanceSTEM, and more!

      All of the automation learning systems combine hearty curriculum packed full of on-the-job applicable knowledge with real-world industrial components for exceptional hands-on skill-building. Many of these systems also feature fault troubleshooting so that learners can understand how to recognize common system problems and malfunctions and how to correct them.

      Robotics

      Amatrol’s robot learning systems feature the Pegasus II (880-RA2-1-B), which has an open arm design that supports hands-on knowledge application and skill development. While small in size, the Pegasus is a giant when it comes to teaching and learning capabilities. Within the Robotics and Computer Programming 1 system (94-RCP1) and the add-on Flexible Manufacturing 1 (94-FMS1A) and 2 (94-FMS2), major topics include:

      • Application Development
      • Production Control
      • Point-to-Point Assembly
      • Palletizing
      • Pneumatic Robot Control
      • And More!

      In addition to hands-on skill-building with an actual Pegasus robot, Amatrol also offers simulation software for both Pegasus and Saturn robots. Learners can practice the same skills in a simulated environment as they would with actual robots.

      Programmable Logic Controllers and Mechatronics

      Programmable logic controllers are arguably the most important component in advanced manufacturing. Amatrol features the two industry leaders in PLCs in Allen-Bradley and Siemens, specifically the AB CompactLogix L16 and the Siemens S7-300 series. Within Amatrol’s automation systems, PLCs are integrated with mechatronics stations to recreate an actual automated line in your classroom.

      Amatrol’s mechatronics choices includes both a Large Scale Mechatronics Line, which features a robust nine carts, and a Tabletop Mechatronics line for customers that have more restricted classroom space or need to transport the learning system between multiple venues. The large scale line covers topics like:

      • Pick and Place Feeding
      • Gauging
      • Orientation Processing
      • Sorting / Buffering
      • Servo Robotic Assembly
      • Torque Assembly
      • Inventory Storage
      • CNC Mill
      • Electro-Hydraulic Testing

      This line also features a large assortment of add-on systems like:

      • Human-Machine Interface
      • Troubleshooting
      • RF Identification, and
      • Vision

      There is also an option to purchase an integration package to substitute the Pegasus II robot used with the Servo-Robotic Assembly station with a customer-supplied Fanuc 200iD/4S robot.

      Amatrol’s tabletop mechatronics learning system features four stations and utilizes an Allen-Bradley MicroLogix 1000 PLC. This system covers topics like automation operation, sorting, distribution, inspection, indexing, and inventory.

      High School Options for Automation Training

      In addition to learning systems geared toward post-secondary and industrial customers, Amatrol also offers systems specifically designed for high schools. One of the biggest challenges facing the workforce today is a skilled worker shortage. Because of this, Amatrol is dedicated to providing high schools with learning solutions that will cover applicable STEM knowledge and advanced manufacturing topics and skills. High School learning systems within the automation area include:

      • Robotics 1 Learning System (96-ROB1-A)
      • Robotics 2 Learning System (96-ROB2-A)
      • Robotics 1 Simulation Software (96-RSS1)
      • Robotics 2 Simulation Software (96-RSS2)
      Article Count:
      11
  • Kyoritsu Indonesia
    Article Count:
    2
  • Legrand Indonesia
    Article Count:
    1
    • Power Equipment & Accessories
      Article Count:
      0
      • Industrial Sockets
        Article Count:
        1
      • Viking & Marking Systems

        A wide range of accessories, to adapt your enlcosures to the requirements of all your sites, simplify your work and save you time. Marking systems, cable ties, cable ducting different solutions for perfect indentification & wiring management of enclosures

        Article Count:
        1
    • Wiring Devices

      Wiring Devices

      Legrand is the only market player with wiring devices offerings in all the major international standards including US, German, British, French, Italian, Chinese and Korean. With more than 100 ranges of wiring devices encompassing in excess of 200 functions, you can choose from a wide spectrum of products to get the solution that best suits your project and local electrical standards.

      Article Count:
      0
      • Arteor

        The Ideal Solution, Always & Everywhere

        Versatility makes Arteor the ideal choice for any project, anywhere in the world. Stunning finishes and desirable materials position the range at the forefront of design, with virtually limitless functionality making it the ultimate range for residential and commercial projects.

        Article Count:
        7
      • BTicino Axolute

        41 available finishes for great freedom of choice. Axolute transforms switch-plate into ornamental details that can be varied in keeping with the style of the decor and personal tastes.  

        In rectangular styling, handcrafted Axolute made in Swarovski. Elements are created in just the same way as gems are created, by individually hand-setting Xilion-cut crystals.

        Article Count:
        2
      • Mallia
        Article Count:
        2
  • Tekiro Indonesia
    Article Count:
    1
  • Mennekes Indonesia
    Article Count:
    4
  • Panasonic Indonesia
    Article Count:
    3
  • Teledyne Lecroy Indonesia
    Article Count:
    1
  • Thomas&Betts Indonesia
    Article Count:
    1
  • Motorola Indonesia
    Article Count:
    3

PT. MAJU JAYA TEKNIK

PT. Maju Jaya Teknik vision, To be Indonesia's leading Distributor for test measuring equipment and educational training products in key selected market. Our Values : Innovation, creativity, Commitment for excellence, Maximize potential, Think Global.

Products and Services

PT. Maju Jaya Teknik products : Amatrol, Kyoritsu, Teledyne LeCroy, ABB (Low Voltage Products), Baldor, Mennekes, Legrand, Simon, Panasonic (LED Lamp),Kabel Metal Indonesia, Jembo, GAE, KSS, Fort, Nankai, Tekiro, Hasegawa.
PT. Maju Jaya Teknik services : Diagnostic Troubleshoot, Cleaning and Balancing Load, Panel Maker.

Upcoming Events

27-29 July 2016 - Mechanical Electrics Exhibition. Jiexpo Kemayoran 


14-16 September 2016 - GESS Exhibition. JCC Senayan

Contact Us

Ruko Concordia SRB 25 Kota Wisata Cibubur Bogor, Indonesia 16920

Call/WA +6221-29478925/+6281-289462227

 

This email address is being protected from spambots. You need JavaScript enabled to view it.